Memory metal (solid-solid phase change)

>bend>>apply heat>

ABOVE: Nitinol or "memory metal" as it is called is a nickel-titanium alloy that may be "trained" to remember its shape. If the proper kind of memory metal is trained to a particular shape in its low temperature or martensite phase (left) and is then bent out of shape (middle), then gently heating the metal with a heat gun or hot water to its high temperature or austenite phase will restore the metal to its trained shape (right). Training the metal involves heating it to a much higher temperature, such as that of a candle flame.

To train a piece of wire, bend it to the desired angle outside of a candle flame. Then hold onto the wire tightly and place the desired bend point into the candle flame. Since the material is a metal it will conduct heat, so you may find that holding the wire with gloves or pliers is desireable. The wire will initially try to straighten out as it heats up, but if you hold the wire tightly it will then soften at the point of the wire in the flame, creating a nice, tight bend. The hot, bent wire may be cooled in water. The Institute for Chemical Education has sold memory metal versions of its ICE logo.